Selecting Destinations By Searching An Ldap Server - Ricoh C23535 Operating Instructions Manual

Selecting Destinations by Searching an LDAP Server

By accessing an LDAP server, you can search for destinations and select them.
Important
❒ To use this function, an LDAP server must be connected to the network. In
addition, under [System Settings], the server must be registered and [LDAP
Search] must be set to [On]. For details, see General Settings Guide.
A
Press [Search Dest.].
B
Select the LDAP server that appears next to [Address Book].
Register the LDAP server in advance in [System Settings].
If authentication is required to access the selected server, the authentication
screen appears. To authenticate, enter the user name and password.
C
To search by destination name, press [Name].
To search by e-mail address, press [E-mail Address].
The soft keyboard appears.
You can also search by combining [Name] and [E-mail Address]. If you search
by [Name], whether the search is based on surname or first name depends on
how the administrator has configured searching.
Specifying E-mail Destinations
1
23