Ricoh 920F Operating Instructions Manual page 192

The "Programmed" message appears.
4. Place the originals, and then press the [Start] key.
• To cancel the Series Copies function in step 1, press the [Combine/Series] key again. Make sure the
indicator goes off.
• To display the screen in step 3, select [Always Specify] for [Orientation] with Copier Features in User
Tools. If [Do not Specify] is selected, proceed to step 4. For details about Orientation, see "User Tools
Menu".
• p.63 "User Tools Menu"
Series Copies
2
55