Ricoh 920F Operating Instructions Manual page 403

2. Sending Scan Files to Folders
2. Select [Interface Settings], and then press the [OK] key.
2
3. Select [Network], and then press the [OK] key.
4. Select [Machine IPv4 Address] to specify the machine's IPv4 address, and then press the
[OK] key.
To specify a static IPv4 address for this machine, select [Specify], and then press the left selection key
to select [IP Add.]. Enter the IP address by using the number keys, and then press the [OK] key.
To obtain an IPv4 address from a DHCP server automatically for this machine, select [Auto-Obtain
(DHCP)], and then press the [OK] key.
5. Select [IPv4 Gateway Address], and then press the [OK] key.
Select [Effective Protocol], select [SMB], and then select [Active]. Then press the [OK] key.
To send files to Netware folders, select [NetWare], and then select [Active].
6. Select [LAN Type] and [Ethernet], and then press the [OK] key.
• If an extended wireless LAN board (optional) is installed, press [LAN Type] on [Interface Settings],
then press [Ethernet] and then configure the network settings.
Configure the necessary settings in [Scanner Features]
Using [Scanner Features], you can make or change various settings related to the scanner function, such
as compressing scan data or viewing the scanner journal. Configure the scanner settings according to your
environment and how you will be using the machine.
This section explains how to display the Scanner Features screen. For details about the settings on this
screen, see "Scanner Features".
1. Press the [User Tools/Counter] key.
2. Select [Scanner Features], and then press the [OK] key.
The Scanner Features screen appears.
54