Ricoh 920F Operating Instructions Manual page 158

3. Select [Original Size] using [ ] or [ ], and then press the [OK] key.
4. Select [Regular Size] using [ ] or [ ], and then press the [OK] key.
5. Select the original size using the scroll keys, and then press the [OK] key.
The "Programmed" message appears.
When the regular size originals settings are registered,
display.
• To cancel the size you have set, press the [Clear Modes] key.
Custom sizes
When placing a custom size original on the exposure glass or in the ADF, specify the size of the original
using the number keys.
• Original sizes that can be set with this function are:
• ADF: vertical 139-216 mm (5.5-8.5 inches), horizontal for 1-sided originals 139-1260 mm
(5.5-49.6 inches), horizontal for 2-sided originals 160-356 mm (6.3-14 inches)
• Exposure glass: vertical 139-216 mm (5.5-8.5 inches), horizontal 160-356 mm (6.3-14 inches)
Placing Originals
appears on the top of the copy
1
21