Ricoh 920F Operating Instructions Manual page 305

3. Printing Stored Documents
6. Select the file you want to print using the [ ] or [ ] key, and then press [Print].
The confirmation screen appears.
If you set a password in the printer driver, a password confirmation screen appears. Enter the
3
password.
7. Enter the number of copies to print, and then press [Print].
The Stored Print file is printed.
Press [Cancel] to cancel printing.
• When multiple files are selected without setting a quantity, one set less than the minimum number of
all settings is applied. If the least number of settings is one set, all selected files will be printed at one
set.
• If the number of set quantity is changed when [User ID] is pressed in step 5, the changed quantity is
applied to all selected files.
• To stop printing after printing has started, press [JobReset]. A Stored Print file is not deleted even if
[JobReset] is pressed.
• The Stored Print file that sent to the printer is not deleted unless you delete a file or select [Auto Delete
Stored Jobs].
• You can set or delete a password after sending files to the printer. Select the file and press [Change]
in the Print Job List screen. To set a password, enter the new password. To delete the password, leave
the password box blank on entering or confirming the new password, and press the [OK] key.
• For details about the error log on the display panel, see "Checking the Error Log".
• For details about [Auto Delete Stored Jobs], see "System".
• p.99 "Checking the Error Log"
• p.111 "System"
92