Ricoh 920F Operating Instructions Manual page 321

5. Printer Features
1. Press the [User Tools/Counter] key.
2. Select [Printer Features] using the [ ] or [ ] key, and then press the [OK] key.
3. Select [List/Test Print] using the [ ] or [ ] key, and then press the [OK] key.
4. Select [Config. Page] using the [ ] or [ ] key, and then press the [OK] key.
The configuration page is printed.
5. Press the [User Tools/Counter] key.
Interpreting the configuration page
This section describes the Configuration Page.
System Reference
• Unit Number
5
Displays the serial number assigned to the board by its manufacturer.
• Total Memory
Displays the total amount of memory (SDRAM) installed on the printer.
• Firmware Version
• Printer
Displays the version number of the printer firmware.
• System
Displays the version number of the system firmware.
• Engine
Displays the version number of the printer engine.
• LCDC
Displays the version number of the panel display.
• NIB
Displays the version number of the Network interface.
• Device Connection
This item(s) appears when the device option(s) is installed.
• HDD: Font/Macro Download
Displays the capacity of the hard disk drive.
• Printer Language
Displays the version number of the printer driver language.
• Attached Equipment
Displays the installed optional equipments.
108