Ricoh 920F Operating Instructions Manual page 326

The default setting is 8
Letterhead Setting
You can rotate original images when printing.
When printing, original images are always rotated by 180 degrees. Therefore, output might not be
as expected when printing onto letterhead or preprinted paper requiring orientation. Using this
function, you can specify image rotation.
The default setting is [Auto Detect].
• Off
When set to [Off], original images are rotated by 180 degrees.
• Auto Detect
When set to [Auto Detect], the machine detects a letterhead or preprinted paper automatically,
and does not rotate the image.
• On (Always)
When set to [On (Always)], the machine does not rotate.
This function reduces printing speed.
Bypass Tray Priority
Specify whether (Printer) Driver/Command or Machine Settings, has priority for determining the
paper size for the bypass tray.
The default setting is [Driver/Command].
Edge to Edge Print
You can select whether or not to print on the entire sheet.
The default setting is [Off].
Default Printer Lang.
You can set the default printer language if the machine cannot find the printer language automatically.
The default setting is [PCL].
Tray Switching
You can specify whether or not the machine automatically switches paper trays if paper of the specified
size and type is not loaded in the driver-designated tray.
The default setting is [Off].
RAM Disk
You can change the settings of the RAM disk.
This menu appears only when the optional hard disk is not installed.
Extend Auto Tray Switching
This setting enables the machine to switch paper trays automatically, regardless of whether the tray
is manually or automatically selected.
1
/ 11.
2
System
5
113