Ricoh 920F Operating Instructions Manual page 297

3. Printing Stored Documents
• Even after you turn off the printer, stored documents remain. However, the [Auto Delete Temporary
Jobs] or [Auto Delete Stored Jobs] settings are applied first.
• If the application has a collate option, make sure it is not selected before sending a print job. Locked
Print jobs are automatically collated by the printer driver as default. If a collate option is selected in
the application print dialog box, more sets than intended may be printed.
• After the Locked Print file is printed, the job is automatically deleted.
• Locked Print files printed or deleted using Web Image Monitor, after you select [Locked Print] using
the control panel will appear on the display panel. However, an error message will appear if you try
3
to print or delete those Locked Print files.
• For details about the error log on the display panel, see "Checking the Error Log".
• For details about [Auto Delete Temporary Jobs] or [Auto Delete Stored Jobs], see "System".
• p.99 "Checking the Error Log"
• p.111 "System"
Printing a Locked Print file
The following procedure describes how to print a Locked Print file with the PCL 6/5e, or PostScript 3 printer
driver. For information about how to print a Locked Print file with the PostScript 3 printer driver, see "Using
PostScript 3", PostScript 3 Supplement.
• Applications with their own drivers, such as PageMaker, do not support this function.
1. Configure the Locked Print in the printer driver's properties.
For details about configuring the printer drivers, see the corresponding Help files.
2. Start printing from the application's Print dialog box.
The Locked Print job is sent to the printer.
3. On the printer's control panel, press [Prt.Jobs].
84