Detaching And Refitting The Fuser Thermostat; Detaching And Refitting The Fuser Thermistor - Kyocera KM-6030 Service Manual

(5) Detaching and refitting the fuser thermostat

Follow the procedure below to check or replace the fuser thermostat.
Caution
Use the specified thermostat for replacement.
Procedure
1. Remove the fuser unit (see page 1-6-70).
2. Remove the upper fuser cover (see page 1-
6-72).
3. Remove two screws and then remove the
fuser thermostat from the fuser unit.
4. Check or replace the fuser thermostat and
attach the thermostat to the fuser unit.
5. Refit the upper fuser cover to the fuser unit.
6. Refit the fuser unit.

(6) Detaching and refitting the fuser thermistor

Follow the procedure below to check or replace the fuser thermistor.
Procedure
1. Remove the fuser unit (see page 1-6-70).
2. Remove the upper fuser cover (see page 1-
6-72).
3. Remove each connector and each screw,
and then remove the fuser thermistor from
the fuser unit.
4. Check or replace the fuser thermistor and
refit the thermistor to the fuser unit.
5. Refit the upper fuser cover to the fuser unit.
6. Refit the fuser unit.
Fuser thermostat
Figure 1-6-144
Connectors
Fuser thermistor
Figure 1-6-145
2FB/2FC
Fuser thermistor
1-6-75