Message List; System Log Information - Ricoh Aficio SP 5200DN Operation And Use Manual

Message List

This is a list of messages that appear in the printer's system log. The system log can be viewed using the
"syslog" command.

System Log Information

Use the following command to display the system log information:
• UNIX: Use the "syslog" parameter and the "rsh", "rcp", "ftp", and "sftp" commands.
• mshell: Use the "syslog" command.
• Depending on the printer you are using, some of these messages might not appear.
Access to NetWare server <file server name> denied. Either there is no account for this print
server on the NetWare server on the password was incorrect.
Login to the file server failed when the print server was online. Make sure the print server is registered in
<file server name>. If a password is specified for the print server, delete the password.
account is unavailable: same account name be used.
User account is disabled. This could be because it uses the same account name as the administrator account.
account is unavailable: The authentication password is not set up.
User account is disabled. This could be because the authentication password is not set, and only the
encryption account is set.
account is unavailable: encryption is impossible.
Encryption is not possible and account is disabled. This could be because:
• Security option is not installed.
• Encryption password has not been specified.
add_sess_IPv4:bad trap addr :<IPv4 address>, community:<community name>
The IPv4 address (0.0.0.0.) is unavailable when the community access type is TRAP. Specify the host IPv4
address for the TRAP destination.
add_sess_IPv6:bad trap addr :<IPv6 address>, community:<community name>
The IPv6 address [::] is unavailable when the community access type is TRAP. Specify the host IPv6 address
for the TRAP destination.
add_sess_IPv4: community <community name> already defined.
The same community name already exists. Use another community name.
Message List
2
97