Windows 7, Windows Server 2008 R2 - Usb - Ricoh Aficio SP 5200DN Operation And Use Manual

7. Specify the location where the source files of the printer driver are stored.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• PCL 5e
D:\DRIVERS\PCL5E\XP_VISTA or x64\(language)\DISK1
• PCL 5c
D:\DRIVERS\PCL5C\XP_VISTA or x64\(language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\XP_VISTA or x64\MUI\DISK1
• PostScript 3
D:\DRIVERS\PS\XP_VISTA or x64\MUI or (language)\DISK1
If the file path of the printer driver contains the word "MUI", the driver will be installed in the language
of the operating system.
The PostScript 3 printer driver with the selected language will be installed. The English printer driver
is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues,
Russian.
8. Check the printer driver location, and then click [Next].
9. Click [Close].
If the installation is successful, the icon of the printer connected to the "USB001" port is added to the
[Printers], [Printers and Faxes], or [Devices and Printers] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
• The number after "USB" varies depending on the number of printers connected.

Windows 7, Windows Server 2008 R2 - USB

1. Close all applications except this manual.
2. Check that the power of the printer is off.
3. Connect the printer to your computer with a USB cable.
Connect the USB cable firmly.
4. Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
5. Click [Devices and Printers].
6. Double-Click the icon of printer you want to use in the [Unspecified] category.
7. Click the [Hardware] tab.
Installing the Printer Driver Using USB
3
37