Using The Lpr Port - Ricoh Aficio SP 5200DN Operation And Use Manual

2. Network Connection
11. Click [OK] to close the [Install From Disk] window.
12. Select the brand name and model name of the printer you want to use, and then click [OK].
13. Check the printer name.
Under Windows 7, click [Next].
14. Configure the default printer as necessary, and then click [Next].
2
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
Under Windows 7, configure the default printer as necessary.
15. Click [Finish].
If installation is successful, the icon of the printer connected to the IPP port will appear in the window
for configuring printers.
• To stop installation of the selected driver, click [Cancel] before installation is complete.

Using the LPR Port

This describes how to install the PCL or PostScript 3 printer drivers using the LPR port.
• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
Installing the PCL printer driver
1. Close all applications except this manual.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PCL Printer Drivers].
The software license agreement appears in the [License Agreement] window.
5. After reading the agreement, select the [I accept the agreement.] check box, and then click
[Next].
16