Spoolsw; Ssdp - Ricoh Aficio SP 5200DN Operation And Use Manual

spoolsw

Use the "spoolsw" command to view and configure the Job Spool settings.
You can only specify diprint, lpr, ipp, ftp, smb, sftp, and wsprn protocol.
• The "spoolsw" command for configuring Job Spool settings is available only when the hard disk is
installed.
View settings
The Job Spool setting appears.
msh> spoolsw
Job Spool setting
msh> spoolsw spool {on | off}
• Specify "on" to enable Job Spool, or "off" to disable it.
Resetting Job Spool setting
msh> spoolsw clearjob {on | off}
• When the printer power is cut during job spooling, this determines whether to reprint the spooled
job.
Protocol configuration
msh> spoolsw diprint {on | off}
msh> spoolsw lpr {on | off}
msh> spoolsw ipp {on | off}
msh> spoolsw smb {on | off}
msh> spoolsw ftp {on | off}
msh> spoolsw sftp {on | off}
msh> spoolsw wsprn {on | off}

ssdp

Use the "ssdp" command to view and configure the SSDP settings.
View settings
msh> ssdp
Setting effective time
msh> ssdp profile {1801-86400}
The default is 10800 seconds.
Using telnet
2
69