Specifying An Ip Address (No Dhcp) - Ricoh Aficio SP 5200DN Operation And Use Manual

5. Configuration
• If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set
automatically.
• If the printer is already placed on a TCP/IP-capable environment, you can also use a Web browser
to configure the IP address-related settings.
• Configure these setting as necessary. See Software Guide for details.

Specifying an IP Address (No DHCP)

Follow this procedure to assign a specific IP address to the printer. This is only necessary when you will use
the printer on a network without DHCP, or want to prevent the printer's IP address from changing.
Before beginning, make sure that you know the IP address, subnet mask and gateway address that the
printer will use.
5
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Network], and then press the [OK] key.
76
CEC216