Messages Displayed When Installing The Printer Driver; Windows Xp, Windows Server 2003/2003 R2; Windows Vista, Windows Server 2008 - Ricoh Aficio SP 5200DN Operation And Use Manual

Messages Displayed When Installing the Printer
Driver
This section describes what to do if a message appears when installing the printer driver.
Message number 58 or 34 indicates that the printer driver cannot be installed using Auto Run. Install the
printer driver using [Add Printer] or [Add a Printer].
Message number 58 appears if there is a newer version of the printer driver already installed.

Windows XP, Windows Server 2003/2003 R2

This section describes the procedure under Windows XP or Windows Server 2003/2003 R2.
1. On the [Start] menu, click [Printers and Faxes].
Under Windows XP Home Edition, on the [Start] menu, click [Control Panel].
2. Click or double-click [Add a printer] or the [Add Printer] icon.
3. Follow the instructions in Add Printer Wizard.
If the printer driver is on the CD-ROM, the location of the driver is \DRIVERS\(PCL6, PCL5C,
PCL5E, or PS)\XP_VISTA\(language) or MUI\DISK1. If the installer starts, click [Cancel] to quit.
4. Specify a port.
• Available ports vary according to your Windows operating system or the type of interface. For details,
see p.9 "Network Connection" or p.35 "Local Connection".

Windows Vista, Windows Server 2008

This section describes the procedure under Windows Vista and Windows Server 2008.
1. On the [Start] menu, click [Control Panel].
2. Click [Hardware and Sound].
3. Click [Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the printer driver is on the CD-ROM, the location of the driver is \DRIVERS\(PCL6, PCL5C,
PCL5E, or PS)\XP_VISTA\(language) or MUI\DISK1. If the installer starts, click [Cancel] to quit.
6. Specify a port.

Messages Displayed When Installing the Printer Driver

5
51