Installing The Printer Driver Using Parallel Cable; Installing The Pcl Printer Driver - Ricoh Aficio SP 5200DN Operation And Use Manual

3. Local Connection

Installing the Printer Driver Using Parallel Cable

This describes how to install the PCL or PostScript 3 printer driver when using a parallel port.
To use a printer connected using a parallel interface, click [LPT1] when installing the printer driver.
• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
3

Installing the PCL Printer Driver

This describes how to install the PCL printer driver when using a parallel port.
1. Close all applications except this manual.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PCL Printer Drivers].
The software license agreement appears in the [License Agreement] window.
5. After reading the agreement, select the [I accept the agreement.] check box, and then click
[Next].
6. Select the printer driver you want to use in the [Select Program] window.
You can select several printer drivers.
The PCL 6 printer driver is installed in the language specified by your operating system.
7. Click [Next].
8. Select the check box of the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
9. Double-click the printer name to display the printer settings.
The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer
model, and port.
10. Check that [LPT1:] is shown in [Port].
11. Configure the user code, default printer, and shared printer as necessary.
12. Click [Continue].
40