2. Remote Maintenance Using telnet
<interface name> interface down
The interface managed by the supplicant is disabled, or cannot connect to the access point.
<interface name> interface up
The interface managed by the supplicant is enabled, or is connected to the access point.
<Interface> started with IP : <IP address>
2
IP address (IPv4 or IPv6 address) has been set for the interface and is operating.
<Interface>: Subnet overlap.
The same IP address (IPv4, or IPv6 address) and the subnet mask is used with other device.
IPP cancel-job: permission denied.
User name authentication failed when the spooled job was being canceled.
IPP job canceled. jobid=%d.
The spooled job was canceled due to error or user request.
job canceled. jobid=<job ID>.
The spooled job was canceled due to error or user request.
LeaseTime=<lease time>(sec), RenewTime=<renew time>(sec).
The resource lease time received from the DHCP server is displayed in [lease time] in seconds. The renewal
time is displayed in [renew time] in seconds.
LEAP challenge to access point failed
The LEAP challenge to the access point has failed.
Login to fileserver <file server name> (<IPX|IP>,<NDS|BINDERY>)
When the print server was online, the system logged in to <file server> in NDS or BINDERY mode. The
transfer protocol in use is also displayed.
Manual[%s] is disable, set authentication key.
The specified manual SA entry is invalid. Set the authentication key.
Manual[%s] is disable, set encryption key.
The specified manual SA entry is invalid. Set the authentication key.
Memory allocate error.
Data cannot be obtained.
Disconnect the USB cable, and then connect it.
102