Ricoh Aficio SP 5200DN Operation And Use Manual page 815

Sp 5200dn; sp 5210dn printers
Hide thumbs Also See for Aficio SP 5200DN:
Table of Contents

Advertisement

server not trusted
The RADIUS server cannot be trusted.
Session_IPv4 <community name> not defined.
The requested community name is not defined.
Session_IPv6 <community name> not defined.
The requested community name is not defined.
session_IPX <community name> not defined.
The requested community name is not defined.
Set context to <NDS context name>
The NDS context name <NDS context name> has been set.
shutdown signal received. network service rebooting...
The network reboot process is starting.
smbd start. (NetBIOS)
SMBD (Server Message Block Daemon) has been started.
Snmpd Start.
The snmpd has started. This message is displayed only when the power is turned ON.
SMTPC: failed to get smtp server ip-address.
The SMTP server IP address could not be obtained. This could be because:
• The specified DNS server could not be found.
• No connection to the network has been established.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address could not be found in the DNS server.
SMTPC: failed to connect smtp server. timeout.
Connection to the SMTP server failed due to timeout. This could be because the specified SMTP server
name is incorrect, or no connection to the network has been established, or the network configuration is
incorrect, so there is no response from the SMTP server. Check the SMTP server name, or the network
connection and configuration.
SMTPC: refused connect by smtp server.
Connection to the SMTP server is denied. This could be because server other than the SMTP server has
been specified, or the specified SMTP server port number is incorrect. Check the SMTP server name, port
number, or the SMTP server port number.
Message List
2
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio sp 5210dn

Table of Contents