Ricoh Aficio SP 5200DN Operation And Use Manual page 627

4. Press the [ ] or [ ] key to select [Level 0], [Level 1], or [Level 2], and then press the [OK]
key.
5. Press the [Menu] key.
Specifying Network Security Level using Web Image Monitor
This can be specified by the network administrator.
Use the following procedure to specify the Network Level setting from Web Image Monitor.
For details about logging in and out with administrator authentication, see p.22 "Using Web Image
Monitor to Configure Administrator Authentication".
1. Log in to Web Image Monitor as an administrator.
2. Click [Configuration] in the Menu area, and then click [Network Security] under "Security"
category.
3. Select the network security level in "Security Level".
4. Click [OK].
5. Click [OK].
6. Click [Logout].
7. Close Web Image Monitor.
Status of functions under each Network Security Level
The following tables show the effects the different network security levels have on each function.
*1
TCP/IP
Function
*2
TCP/IP
HTTP> Port 80
IPP> Port 80
IPP> Port 631
SSL> Port 443
SSL> Permit SSL/TLS Communication
SSL/TLS version> SSL2.0
Level 0
Active
Open
Open
Open
Open
Ciphertext
Priority
*2
Active
Preventing Unauthorized Access
Level 1 Level 2
Active Active
Open Open
Open Open
Open Close
Open Open
Ciphertext Ciphertext Only
Priority
Active Active
7
89