2. Remote Maintenance Using telnet
View settings
msh> hostname
IPv4 Configuration
msh> hostname "interface_name" "printer_name"
• Enter the printer name using up to 63 alphanumeric characters.
2
• You cannot use a printer name starting with "RNP" or "rnp".
• The Ethernet interface and Wireless LAN interface will have the same printer name.
• wlan can be specified only when the Wireless LAN interface unit is installed.
• If you do not specify an interface, the Ethernet interface is selected automatically.
ether
wlan
Initializing the printer name for each interface
msh>hostname "interface_name" clear "name"
ifconfig
Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address,
default gateway address) for the printer.
View settings
msh> ifconfig
IPv4 configuration
msh> ifconfig "interface_name" "parameter" "address"
• If you did not enter an interface name, it is automatically set to the Ethernet interface.
• wlan can be specified only when the Wireless LAN interface unit is installed.
ether
wlan
The following explains how to configure an IPv4 address 192.168.15.16 on the Ethernet interface.
msh> ifconfig ether 192.168.15.16
52
Interface name
Interface name
Interface configured
Ethernet interface
Wireless LAN interface
Interface configured
Ethernet Interface
Wireless LAN Interface