Label Paper; Special Paper - Ricoh Aficio SP 5200DN Operation And Use Manual

6. Loading Paper

Label Paper

Paper type setting using the
control panel
Paper type setting using the
printer driver
Supported input tray
6
Maintenance
Duplex printing

Special Paper

Paper weight
Paper type setting using the
control panel
108
The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [Label
Paper] > the [OK] key
[Labels]
Any input tray can be used.
Default: [Label Paper 1]
• [Label Paper 1]
• [Label Paper 2]
• [Label Paper 3]
• [Label Paper 4]
If prints made using the paper tray show heavy smudging, use the
following procedure to change the paper type setting from the control
panel:
• Press the [Menu] key, select [Maintenance], [General Settings],
[Label Paper Setting], and then select [Label Paper 1], [Label
Paper 2], [Label Paper 3], or [Label Paper 4].
When specifying paper thickness, remember that a higher number
indicates greater thickness. Also, because the paper thickness will
normally be detected automatically, change this setting only if a print
problem occurs.
Not supported
2
52 to 220 g/m (14 to 59 lb.)
• The [Menu] key > [Paper Input] > [Paper Type: (tray name)] >
[Special Paper 1] or [Special Paper 2] or [Special Paper 3] >
the [OK] key
• [Special Paper 1]: 52 to 105 g/m
• [Special Paper 2]: 106 to 163 g/m
• [Special Paper 3]: 164 to 220 g/m
2
(14 to 28 lb.)
2
(28 to 43 lb.)
2
(44 to 59 lb.)