Ricoh Aficio SP 5200DN Operation And Use Manual page 407

Default: [On]
• On
• Off
Auto Tray Select
You can select whether to assign each tray to automatically print the paper size and type set by printer
driver.
When using custom size paper, if automatic tray selection is enabled, the size selected on the control
panel has priority. If this setting is disabled, the size selected from the printer driver has priority.
You can select multiple trays.
If you need to have a tray locked, you must select the tray using both printer driver and control panel.
• Tray 1 to 5, Bypass Tray
Default: [On]
• On
• Off
Tray Priority
You can set a tray to be checked first when automatic tray selection is enabled from the printer driver.
The tray selected here is used when no tray is selected for a print job.
It is recommended that you load paper of the size and orientation you use most frequently in the tray
selected in this setting.
Default: [Tray 1]
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Tray 5
• Bypass Tray
• For details about which paper sizes can be specified, see "Supported Paper for Each Tray", Hardware
Guide.
• For details about which paper types can be specified, see "Supported Paper Types", Hardware Guide.
Paper Input Menu
4
93