Ricoh Aficio SP 5200DN Operation And Use Manual page 149

2. Slide the paper guide both sides outward, and then load paper print side up, until it stops.
1
2
3. Adjust the paper guide both sides to fit the paper width.
• When loading paper on the bypass tray, make sure the stack does not exceed the limit mark on the
inner side of the paper guides. For details about the thicknesses of different paper types, see p.105
"Supported Paper Types".
Specifying standard size paper for the bypass tray
• The standard size paper selected using the printer driver overrides that selected using the control
panel, so do not make settings using the control panel if you have already made settings using the
printer driver.
• When [Machine Setting(s)] is selected for [Tray Setting Priority] under [Machine Modes] in [Print
Settings], any settings made using the printer's control panel have priority over any settings made
using the printer driver.
• For details about the printer driver, see the printer driver Help.
1
CEC022
CEC024
Loading Paper in Trays
6
127