IBM System Storage DS3500 Introduction And Implementation Manual page 685

Draft Document for Review March 28, 2011 12:24 pm
Example 21-31 Press "2" to change the installation settings
Type the number of your choice and press Enter. Choice is indicated by >>>.
>>> 1 Start Install Now with Default Settings
2 Change/Show Installation Settings and Install
3 Start Maintenance Mode for System Recovery
4 Configure Network Disks (iSCSI)
5 Select Storage Adapters
88 Help ?
99 Previous Menu
4. Press "1" to select System Settings as shown in Example 21-32 on page 661.
Example 21-32 Press "1" to select system settings
Installation and Settings
Either type 0 and press Enter to install with current settings, or type the
number of the setting you want to change and press Enter.
1 System Settings:
2 Primary Language Environment Settings (AFTER Install):
3 Security Model.......................Default
4 More Options (Software install options)
>>> 0 Install with the settings listed above.
5. Select the installation method. In this case we want a new installation. For that reason, we
selected "New and Complete Overwrite" as shown in Example 21-33.
Example 21-33 Select the installation method
Change Method of Installation
Type the number of the installation method and press Enter.
>>> 1 New and Complete Overwrite
Welcome to Base Operating System
Installation and Maintenance
Method of Installation.............New and Complete Overwrite
Disk Where You Want to Install.....hdisk0
Cultural Convention................C (POSIX)
Language...........................C (POSIX)
Keyboard...........................C (POSIX)
Overwrites EVERYTHING on the disk selected for installation.
Warning: Only use this method if the disk is totally empty or if there
is nothing on the disk you want to preserve.
Chapter 21. AIX 6.1 configuration guide
AIX.fm
661