IBM System Storage DS3500 Introduction And Implementation Manual page 536

7914RSM.fm
14.If there is an Expansion cabinet attached, the System Configuration shows that the
Configuration is still incomplete. The Storage Subsytem Information must be added for the
enclosure too. Figure 16-18 shows this.
Figure 16-18 RSM Configure Storage Subsystem continued...
15.Select the Storage Subsystem again. As shown in Figure 16-19
Figure 16-19 RSM Configure Storage Subsystem continued...
16.Now you will be able to fill in the necessary information for the additional enclosure as
shown in Figure 16-20 on page 513. Use the Copy this form Button for more enclosures.
512
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm