Target Discovery - IBM System Storage DS3500 Introduction And Implementation Manual

7914Admin_iSCSI.fm
2. Enter an alias name in the second line in this tab as in Figure 13-6, and click OK.
Figure 13-6 iSCSI Target Identification

13.3.4 Target Discovery

We discussed techniques for target discovery in 1.3.2, "iSCSI discovery" on page 11. The
Target Discovery tab in Manage iSCSI Setting window (Figure 13-7 on page 325) can be
used to specify if an Internet Storage Name Service (iSNS) will be used to register this iSCSI
Target for easier location by iSCSI Initiators.
To change default target discovery, do these steps:
1. Select Target Discovery tab.
2. Select Use iSNS server, as shown in Figure 13-7 on page 325.
324
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm