IBM System Storage DS3500 Introduction And Implementation Manual page 394

7914support2-0209.fm
Figure 14-45 Successful firmware transfer and activation
6. As described above, the default procedure is to transfer the firmware and NVSRAM and
activate the new versions immediately. However, you may decide to only transfer the
firmware and NVSRAM at this time, and then activate the firmware and NVSRAM at a
later time.
a. To transfer the firmware and NVSRAM, click the checkbox option at the bottom of the
Download Firmware window. See Figure 14-46.
Figure 14-46 Transfer firmware and NVSRAM only (activate later)
370
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm