IBM System Storage DS3500 Introduction And Implementation Manual page 481

7914FDE.fm
Draft Document for Review March 28, 2011 12:24 pm
Figure 15-6 Selection of the FDE Drives
The next check is to ensure that the physical disks are FDE drives and are secure capable. In
Figure 15-7 on page 458, you can see that an array has been created where disk security is
not enabled, as indicated by the unlocked padlock. If you click the array and then right-click
and select View Associated Physical Components, you can view the disks. If you click the
Show FDE button, it will display all the FDE drives and confirm that all the drives in the array
are all secure capable.
The array is already being used and has several logical drives configured and consists of all
FDE drives; therefore, it can be enabled.
457
Chapter 15. Disk Security with Full Disk Encryption drives