IBM System Storage DS3500 Introduction And Implementation Manual page 193

Draft Document for Review March 28, 2011 12:24 pm
What systems are monitored
Depending on how you set up alerts, different storage systems are monitored by the Event
Monitor.
Alerts can be configured as follows:
– To configure alerts for all storage systems listed in the Enterprise Management
window, right-click your local management system in the Enterprise Management
window (at the top of the tree) and choose Configure Alerts, as shown in Figure 6-10.
Figure 6-10 Configure Alerts for all systems
– If you can see the same storage subsystem through different paths, directly attached
and through different hosts running the host agent, you will receive multiple alerts.
Right-click a specific storage system to define the alerting specifically for this storage
server, as shown in Figure 6-11 on page 170.
7914Admin_Enterprise1108.fm
Chapter 6. Administration - Enterprise Management
169