Configure Ethernet Management Ports; View/Enable Premium Features; Manage Iscsi Settings - IBM System Storage DS3500 Introduction And Implementation Manual

7914Admin_Setup.fm

12.10 Configure Ethernet Management Ports

This link enables to change current IP addresses of your storage subsystem. Follow the steps
and comments in section 10.7, "Set Ethernet management ports" on page 276.

12.11 View/Enable Premium Features

Select this link to activate your optional licenses for Premium Features, like storage
partitioning, copy services, encryption, or any others. This procedure is described in section
"Premium Features" on page 200.

12.12 Manage iSCSI Settings

This link is shown in the Setup tab only if optional iSCSI daughter card is installed. It opens a
window as in Figure 12-13, used for setting parameters of iSCSI protocol. All iSCSI
configuration options and also iSCSI port settings are described in Chapter 13,
"Administration - iSCSI" on page 317.
Figure 12-13 iSCSI protocol settings
316
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm