Showing Defined Subsystems In The Storage Manager Configuration - IBM System Storage DS3500 Introduction And Implementation Manual

Draft Document for Review March 28, 2011 12:24 pm
17.5 Showing defined subsystems in the Storage Manager
configuration
Option -d of the SMcli gives a list of defined storage subsystems. There are additional
parameters that can be used together with option -d to display more details about the defined
storage subsystems. These are:
[-i]
[-s]
[-w]
[-v]
[-S]
We use all these parameters in Example 17-4. The output shows that there is a global alert in
place that sends e-mail alerts to e-mail address dsx000rivers.local. The mail server
nile.rivers.local is used and a return address ds3500@nile.rivers.local is shown in the [MAIL
SERVER] section of the output. In addition to that alert, alerts are enabled for the in-band
managed storage subsystems DS3512i.
SNMP alerts are shown for the DS3524-fc. Public is used as the community string and the
SNMP receiver is nile.rivers.local.
The storage array table contains a list of all defined storage subsystems in the configuration
file with their name, the world wide identifier, host names, or IP addresses of the controllers
and the status of the subsystem. This information can be found as well in the Enterprise
Management window of the Storage Manager GUI.
Example 17-4 Displaying details about defined storage subsystems
amazon:~ # SMcli -d -i -s -w -v -S
[MAIL SERVER]
nile.rivers.local ds3500@nile.rivers.local
[ALERT SETTINGS - DEVICE GROUPS]
All storage subsystems
All out-of-band storage subsystems
All in-band storage subsystems
[ALERT SETTINGS - SPECIFIC DEVICES]
Storage arrays:
DS3524-fc 600a0b80001d2bf40000000046265018
DS3512i 092ca896040404040404040404040404
amazon:~ #
Show IP addresses instead of host names.
Show alert settings.
Show world wide identifier.
Show status of the defined subsystems in the configuration file.
Do not list progress information.
DS3500@nile.rivers.local
<None>
colorado@nile.rivers.local
public,nile.rivers.local
<None>
7914appCLI1208.fm
1.1.1.2 Optimal
1.1.1.4 Needs Attention
Chapter 17. Command-Line Interface(CLI)
543