IBM System Storage DS3500 Introduction And Implementation Manual page 369

Draft Document for Review March 28, 2011 12:24 pm
Figure 14-12 State Capture
2. Click the Browse button to specify the location and filename of the state capture
information file (the default file extension is dmp). Then click the Start button to begin
saving the file. You will be asked to confirm that you want to save the state capture data.
Type 'yes' in the box to confirm and then click OK to continue.
Figure 14-13 Confirm State Capture
3. Figure 14-14 on page 346 shows the State Capture window after the state capture
information has been saved to a file.
7914support2-0209.fm
Chapter 14. Administration - Support
345