IBM System Storage DS3500 Introduction And Implementation Manual page 631

Table of Contents

Advertisement

Draft Document for Review March 28, 2011 12:24 pm
Figure 20-4 Select Fstab Options
d. Select Device ID and press F10 to finish as shown in Figure 20-5
Figure 20-5 Select Device ID
Verify the boot order in MPT SAS BIOS to boot from the local hard disks using the
following procedure. If this setting are not correctly configured, the system will try to boot
from the logical drive instead of the local hard disk.
a. Reboot the server and press Ctrl-C at MPT SAS POST as shown in Figure 20-6 on
page 608
Chapter 20. SuSE Linux configuration guide
Linux Config.fm
607

Advertisement

Table of Contents
loading

Table of Contents