IBM System Storage DS3500 Introduction And Implementation Manual page 683

Draft Document for Review March 28, 2011 12:24 pm
10.Select BOOTP protocol as shown in Example 21-25.
Example 21-25 Select the BOOTP menu option
Select Network Service.
PORT - 5 IBM Host Ethernet Adapter: U78A5.001.WIH1752-P1-T6
1.
2.
11.Select the Host Ethernet adapter port to boot from as shown in Example 21-26.
Example 21-26 Select the host ethernet adapter to boot from
Select Device
Device Current Device
Number Position Name
1.
2.
12.The last step is to select Normal Mode Boot to start the installation as shown in
Example 21-27. Select Yes in the following menu to exit System Management Services.
Example 21-27 Select the Normal Mode menu option
Select Task
PORT - 5 IBM Host Ethernet Adapter
( loc=U78A5.001.WIH1752-P1-T6 )
1.
2.
3.
13.A similar message as shown in Example 21-28 will appear. This means that the TFTP
transfer has started.
Example 21-28 TFTP transfer
TFTP BOOT ---------------------------------------------------
Server IP.....................9.42.171.26
Client IP.....................9.42.171.30
Subnet Mask...................255.255.254.0
( 1 ) Filename................./tftpboot/aix1
TFTP Retries..................5
Block Size....................512
FILE
BLKSIZE
BOOTP
ISCSI
4 Interpartition Logical LAN
( loc=U7998.60X.100EB0A-V3-C4-T1 )
- PORT - 5 IBM Host Ethernet Adapter
( loc=U78A5.001.WIH1752-P1-T6 )
Information
Normal Mode Boot
Service Mode Boot
: /tftpboot/aix1
: 512
Chapter 21. AIX 6.1 configuration guide
AIX.fm
659