IBM System Storage DS3500 Introduction And Implementation Manual page 441

Draft Document for Review March 28, 2011 12:24 pm
Figure 14-121 Run Diagnostics
3. Once you have selected the tests to run, click the Run button. You will be asked to confirm
that you want to run the tests, as shown in Figure 14-122. Read the important information.
Then type "yes" in the textbox and then click OK to continue.
Figure 14-122 Confirm Run Diagnostics
4. The tests will run and the test report will be displayed in the Status section of the Run
Diagnostics window as shown in Figure 14-123 on page 418.
7914support2-0209.fm
Chapter 14. Administration - Support
417