IBM System Storage DS3500 Introduction And Implementation Manual page 310

7914Admin_Mappings.fm
Figure 11-5 Define Host: Interface type, known port identifier and Alias
– Select your interface type (SAS in our example)
– Select an active port already detected by the storage subsystem in menu "Known
unassociated host port identifier" as shown in Figure 11-5,
– Or type world-wide port name directly into the field, if the server is not connected or
zoned yet, but you already know its WWPN (see Figure 11-6 on page 287).
286
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm