IBM System Storage DS3500 Introduction And Implementation Manual page 192

7914Admin_Enterprise1108.fm
Refresh
Select this option to refresh the view of the Enterprise Management window (Figure 6-8). You
might use this if a system's status has changed, for example, after an error recovery.
Figure 6-8 Refresh View
Remove
Here you can remove the selected storage subsystem from your view. This will not affect the
views of any other storage management stations. To remove a storage subsystem, select this
option and click OK (Figure 6-9).
Figure 6-9 Remove Subsystem
Configure Alerts
The IBM System Storage DS3500 Manager includes the Event Monitor Service, which
enables the host running this monitor to send out alerts through e-mail (SMTP) or traps
(SNMP). The Event Monitor can be used to alert you of critical events for any of the DS3500
storage subsystems in your environment. For high availability, the event monitor service
should run on two separate host systems that are available 24 hours a day. Both servers
should be capable of out-of-band and in-band management. This ensures proper alerting,
even if one server is down or a connection type has failed.
Note: The DS3500 does not send the e-mail or SNMP trap itself. The management station
(running the event monitor service) sends the notification on behalf of the storage server. If
the management station is down, no alerting will be done.
168
IBM System Storage DS3500: Introduction and Implementation Guide
Draft Document for Review March 28, 2011 12:24 pm