Performing A Manual Discovery Of Storage Subsystems - IBM System Storage DS3500 Introduction And Implementation Manual

Draft Document for Review March 28, 2011 12:24 pm
Figure 5-23 Select Addition Method - Automatic
3. Click Yes to begin an initial automatic discovery of hosts and storage subsystems attached
to the local subnetwork as shown in Figure 5-24.
Figure 5-24 Automatic Discovery
After the initial automatic discovery is complete, the Devices tab of the Enterprise
Management Window displays all hosts and storage subsystems attached to the local
subnetwork.
Note: The Enterprise Management Window can take up to a minute to refresh after an
initial automatic discovery.

5.4.2 Performing a manual discovery of storage subsystems

You can manually add more hosts or storage subsystems. You can use this option to
selectively manage a group of storage subsystems from an SMclient. You can also use this
option to add additional devices to be managed that were not discovered during the SMclient
initial discovery.
Chapter 5. Installing IBM System Storage DS Storage Manager
7914InstallSM01108.fm
155