Lubrication - Epson SC-F2000 Service Manual

SC-F2000

5.6 Lubrication

This section describes necessary lubrication to maintain the functions and performance
of this printer. Make sure to properly lubricate the parts/units specified in this section
as necessary when replacing or maintaining them.

Make sure to perform the lubrication following the specified
C A U T I O N
lubrication points, lubricants, and amount. Otherwise, the
printer may not operate normally.

When lubricating the originally installed parts, first wipe off
the old lubricant completely.
LUBRICATION POINTS LIST
Lubrication
Corresponding Part Name of Lubricant
No.
LEFT FRONT COVER
Part name: G-26
1 / RIGHT FRONT
Part code: 1080614
COVER
Part name: G-84
2 CR Slider
Part code: 1516265
Part name: G-84
Part code: 1516265
3 OIL PAD HOLDER
Part name: O-17
Part code: 1521154
Part name: G-84
4 CR Main Shaft
Part code: 1516265
Part name: G-84
5 Sub Shaft Guide Plate
Part code: 1516265
Part name: G-71
6 Driven Pulley
Part code: 1480655
Part name: G-71
7 Driven Pulley Holder
Part code: 1480655
Part name: G-84
8 TF shaft
Part code: 1516265
MAINTENANCE
Lubrication
Lubrication Tool Reference
φ 2 mm injector
p.294
φ 2 mm injector
p.294
φ 2 mm injector
p.295
φ 2 mm injector
p.295
φ 2 mm injector
p.296
φ 2 mm injector
p.296
φ 2 mm injector
p.297
φ 2 mm injector
p.297
Lubrication
Corresponding Part Name of Lubricant
No.
Part name: G-84
9 Sintered bushing
Part code: 1516265
Part name: G-26
Right TF Shaft Frame
10
Assy
Part code: 1080614
Part name: G-26
11 PG Change Lever
Part code: 1080614
Part name: G-26
12 PG Assy Flange
Part code: 1080614
Revision C
Lubrication Tool Reference
φ 2 mm injector
p.298
φ 2 mm injector
p.298
φ 2 mm injector
p.299
φ 2 mm injector
p.299
293
Confidential