Removing The Suction Fans - Epson Stylus Pro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF/10600

4.3.3.2 Removing the Suction Fans

1. Remove the H Top Cover.
2. Remove the Right and Left Side Cover.
3. Remove the Rear Cover.
4. Move the Head Carriage to the home position.
5. Remove three screws (M3x8) on the clamp securing the Head Carriage and tubes
to the Guide Rail.
6. Unlock the tube clamp from Guide Rail.
7. Remove four screws (M3x8) on the Guide Rail.
8. Remove the Guide Rail.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
(Front side view)
Screws
Thank You For Using TheServiceManualShop.com
Disassembly
Clamp
Metal Clamp
Screws
Tube clamp
Figure 4-67.
Revision D
Guide rail
Marking
(Left side view)
145