Default Set - Comdial DX-80 Installation And Maintenance Manual

EXTENSION
CO LINE
CALL HANDLING
SYS RESOURCE
RESTRICTION
EXT APPLICAT.
CO APPLICAT.
SYS APPLICAT.
Example: To skip to the Extension Application section of Database Administration, input "05" at the
Database Item Select screen and then press [
Exit Database Administration:
•
To exit Database Administration press the ON/OFF button twice. Or lift and replace the handset in the hook-
switch cradle.
Change Database Administration Password:
•
Enter Database Administration using the feature code
++++++++
the default password is 8 characters.)
show show show show
•
Press [ ]. The DB Item Select screen displays.
Note: 1. All database programming items are indexed for fast access.
2. Use the
•
Input 04-01. Then press [
password displays (default is all spaces {blanks}).
chg chg
chg chg
•
Press [ ] to change the password.
•
Input the new eight-character, alphanumeric password using the table below as a guide to characters.
save save save save
•
Press [ ].
•
Continue making other programming changes or exit the programming mode.

Default Set

When an extension user has invoked several features on his or her extension, it may be necessary to clear all
settings and return the telephone set to the factory condition. The Default Set code is used to perform this operation.
Operation
!69
1. Press
The display shows the following screen to confirm the intention:
go go go go
2. Press [ ] to invoke the operation.
You hear the confirmation tone and the operation is complete.
Conditions
The following extension parameters are reset to the value shown:
LNR = empty
SNR = No Saved Number
Memo = No Saved Number
P7290 IMM
DX-80 I
NSTALLATION AND
save save save save
. (Default password.) (Note: "
Volume button
(up or down) to return to the DB Item Select.
save save save save
]. This advances to the System Resources – DB PSWD screen. The current
.
DEFAULT SET
go
3-104
M M
AINTENANCE ANUAL
].
!+*
and then enter the DB Admin password
+
" is the equivalent of entering a space, so
!69