Conference, Meet Me - Comdial DX-80 Installation And Maintenance Manual

•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Conference, Meet Me

Conference is used join telephone connections together. Meet Me Conference simplifies the setup process by
assigning designated system resources as conference destinations. The result is eight separate conference locations
that are joined by dialing the location number. Callers can easily be transferred to these locations. Users may simply
dial the location number. Outside parties can join the conference via the automated attendant simply by dialing the
location number at the auto attendant greeting.
A programmable Conference Tone may be enabled or disabled so that entry into a conference is indicated with an
alert tone or entered into without an alert tone.
Related Features
Conference Supervised/Unsupervised
Related Programming
CO Line – Call Abandon
Call Handling – CO Line Conference
Call Handling – Talk Abandon Time
Call Handling – Meet Me Conference Talk Time
Call Handling – Conference Tone
System Application – Meet Me Conference Directory Number
Operation – Transfer a Caller to a Meet Me Conference
1. While connected to another extension or CO Line, press the Transfer button.
2. Dial the Meet Me Conference location where this party is to be connected (390-397).
3. Hang up to complete the transfer.
Analog Ports (Single Line Telephones)
1. While connected to another extension or CO Line, momentarily press the hook-switch (or press the FLASH
button).
2. Wait for dial tone; then dial the Meet Me Conference (390-397)
3. Hang up to complete the transfer.
Operation – Join a Meet Me Conference
1. Dial the Meet Me Conference location that you wish to join (390-397).
2. Hang up when finished.
Operation – Join a Meet Me Conference from the Auto Attendant
1. When answered by the DX-80 system automated attendant, dial the Meet Me Conference location that you
wish to join (390-397).
2. Hang up when finished.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
3-88
M
ANUAL
390 ~ 397