Setting A Paper Size By Using The Control Panel - Lanier lp145n Hardware Manual

Paper and Other Media

Setting a Paper Size by Using the Control Panel

To load paper whose size cannot be selected automatically, set the paper size on
the control panel. Follow the procedure in this section to set the paper size.
Important
❒ You cannot set custom paper size for Tray 1/2 or Tray 3/4 (optional paper
feed unit). Use the bypass tray if you load paper in custom size, and set by-
pass tray's paper size using the control panel.
A
Press the {Menu} key.
5
B
Select [Paper Input] using {T} or {U}, and then press the {q Enter} key.
C
Select [Tray Paper Size] using {T} or {U}, and then press the {q Enter} key.
D
Select the tray using {T} or {U}, and then press the {q Enter} key.
E
Select the paper size you want to set using {T} or {U}, and then press the
{q Enter} key.
76
AQV251S