Convection Cooking - Panasonic NN-CS596S Operating Instruction And Cook Book

Convection combi steam oven
Hide thumbs Also See for NN-CS596S:
Table of Contents

Advertisement

Convection Cooking

Your Combination Oven can be used as a conventional oven using the CONVECTION
mode which incorporates a heating element with a fan.
For best results always place food in a preheated oven. The grill will come on when
the oven is preheating.
You can cook in three ways when using convection cooking -
1. On the Enamel shelf in the lower or upper shelf position.
2. On the Wire rack shelf in the lower or upper shelf position.
3. Both of the above at the same time, to use the oven for two level cooking.
See individual guidelines on pages 36 and 37 for recommended accessories to use.
You can preheat with or without the Enamel shelf or Wire shelf in position.
Turn Auto Menu/
Press
Temperature dial
Convection
to select oven
Pad
temperature. The
oven starts at
150°C and then
for each press
the temperature
will count up in
10°C stages to
300°C, then to
40°C, 100°C,
110°C etc.
* Note: Open the door using the Pull Down Door, because if the Stop/Cancel Pad is
pressed the program may be cancelled. Then if the time was entered the oven
would revert to cooking on microwave only.
The oven will maintain the selected temperature for approximately 30 minutes. If no
food has been placed inside the oven or a cooking time set, then it will automatically
cancel the cooking program and revert to time of day.
CAUTIONS:
The oven will automatically work on HIGH Microwave Power if a cooking time
is entered without the oven temperature previously being selected.THE
ACCESSORIES AND THE SURROUNDING OVEN WILL GET VERY HOT. USE
OVEN GLOVES.
Press Start to
Enter cooking
preheat. A "P" will
time using Time/
appear in the
Weight Dial.
display window.
Maximum
When the oven is
cooking time is 9
preheated the
hours, 99
oven will beep
minutes.
and the "P" will
flash. Then open
the door and
place the food
inside.* There is
no preheat at
40°C.
35
Press Start Pad.
Note: Check that
only the convec-
tion symbol
is
still in the display.
If the microwave
a
symbol is
displayed this is
incorrect and the
program should
be cancelled.
Reselect the
convection
setting.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inverter nn-cs596s

Table of Contents