To Empty The Hole-Punch Waste Container - Konica Minolta 8031 Instruction Manual
Hide thumbs
Also See for 8031:
- Instruction manual (79 pages) ,
- Basic operations (154 pages) ,
- User manual (144 pages)
Table of Contents
Advertisement
6
To empty the hole-punch waste container
Empty the hole-punch waste container, and then re-install it according to the
following procedure.
1
Slide the finisher away from the
copier.
2
Pull out the hole-punch waste
container.
3
Empty the container.
4
Insert the hole-punch waste
container into its original position.
5
Slide the finisher back against the
copier.
6-52
6.6 When the Message "Remove Punch scraps." Appears
Konica 8020/8031
Advertisement
Table of Contents
