Setting Sounds; Speaker Volume; Entering Characters Using The Number Keypad; Entering Alphanumeric Characters - Muratec MFX-3550 User Manual

Basic setup
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Default Mode and press OK.
5. Press the up/down arrow to select the mode you want.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.

SETTING SOUNDS

You can control the following sounds:
Key sound: Turns the key sound On or Off. With this option set to On, a tone sounds each time a
key is pressed.
Alarm Sound: Turns the alarm sound On or Off. With this option set to On, an alarm tone sounds
when an error occurs or fax communication ends.
Speaker: Turns On or Off the sounds from the telephone line through the speaker, such as a dial
tone or a fax tone. With this option set to Comm. which means "Common", the speaker is on until
the remote machine answers.
Ringer: Adjusts the ringer volume. For the ringer volume, you can select Off, Low, Mid, and
High.
Speaker, ringer, key sound, and alarm sound
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Sound/Volume and press OK.
4. Press the up/down arrow until the sound option you want highlights and press OK.
5. Press the up/down arrow until the desired status or volume for the sound you have selected
highlights and press OK.
6. If necessary, repeat steps 4 through 5 to set other sounds.
7. Press Stop/Clear to return to ready mode.

Speaker volume

To adjust the volume using On Hook Dial:
1. Press On Hook Dial. A dial tone sounds from the speaker.
2. Press the left/right arrow until you hear the volume you want.
3. Press On Hook Dial to save the change and return to ready mode.

ENTERING CHARACTERS USING THE NUMBER KEYPAD

As you perform various tasks, you may need to enter names and numbers. For example, when you set
up your machine, you enter your name or your company's name, and the fax number. When you store
fax numbers or email addresses in memory, you may also enter the corresponding names.

Entering alphanumeric characters

1. When you are prompted to enter a letter, locate the button labeled with the character you want.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com manuals search engine
62
Page 3 of 7
8/4/2009