Printing Address Book; Scan To Pc - Muratec MFX-3550 User Manual

Scanning
5. Press the up/down arrow until the name and address you want highlights. You can search
Searching with a particular first letter
1. Press Scan/Email and Address Book on the control panel.
2. Press the up/down arrow to highlight Search & Send and press OK.
3. Press the up/down arrow until the option you want highlights and press OK.
4. Press the up/down arrow to highlight ID and press OK.
5. Enter the first few letters of the name you want.
6. Press the up/down arrow until the name you want highlights and press OK.

Printing Address Book

You can check your Address Book information by printing a list.
1. Press Scan/Email and Address Book on the control panel.
2. Press the up/down arrow to highlight Print and press OK.
3. Press the up/down arrow until the option you want highlights and press OK.
Your Address Book information prints out.
SCANNING ORIGINALS AND SENDING TO YOUR COMPUTER

(SCAN TO PC)

You can scan an image on the machine via the Scan Manager program that is installed in
your networked computer.
For USB connected machine
This is a basic scanning method for usb connected machine.
1. Make sure that the machine is connected to your computer and powered on.
2. Load originals face up into the document feeder, or place a single original face down on the
scanner glass.
(See
3. Press Scan/Email on the control panel.
4. Press the up/down arrow to highlight Scan To PC and press OK.
5. Press the up/down arrow to highlight Local PC and press OK.
6. Press the up/down arrow until the application program you want highlights and press OK.
Default setting is My Documents.
7. Press the up/down arrow until the setting you want highlights and press OK.
8. Scanning begins.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
upwards or downwards through the entire memory in index(numerical) order.
Loading originals.)
If you see Not Available message, check the port connection.
To add or delete the folder where the scanned file is saved, add or delete the application
program in Scan Manager > Properties > Set Scan Button.
Resolution: Sets the image resolution.
Scan Color: Sets the color mode.
Scan Format: Sets the file format in which the image is to be saved.
Scan Size: Sets the image size.
Scan Format appears only when you selected the Scan destination to My Documents.
If you want to scan from the default setting, press Start.
Scanned image is saved in computer's My Documents > My Pictures > Samsung folder.
manuals search engine
114
Page 4 of 16
8/4/2009