Muratec MFX-3550 User Manual page 75

Media and tray
3. Load the paper with the side to be printed on facing up.
4. Squeeze the multi-purpose tray paper width guides and adjust them to the width of the paper.
5. When you print a document, set the paper type and size for the multi-purpose tray.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
Do not force too much, or the paper will bent resulting in a paper jam or skew.
When printing the special media, you must follow the loading guideline. (See
special media.)
When papers overlap when printing using Multi-purpose tray, open tray 1 and remove
overlapping papers then try printing again.
When paper does not feed well while printing, push the paper in manually until it starts
feeding automatically.
For information about setting the paper type and size on the control panel. (See
paper size and type.)
The settings made from the machine driver override the settings on the control panel.
1. To print in application, open an application and start the print menu.
2. Open Printing Preferences. (See
3. Press the Paper tab in Printing Preferences, and select an appropriate paper type.
For example, if you want to use a label, set the paper type to Label.
4. Select Manual Feeder in paper source, then press OK.
5. Start printing in application.
6. After printing, close the multi-purpose tray.
manuals search engine
Opening printing preferences.)
74
Page 8 of 14
Printing on
Setting the
8/4/2009