Network Scanner; Changing The Scan Feature Settings - Muratec MFX-3550 User Manual

Scanning
Local Scanner
Select when your machine is connected via USB or LPT port.

Network Scanner

Select when your machine is connected via network port.
Auto detection on the network: Automatically detects your machine.
IP address: Enter in your machine's IP address to detect your machine.

CHANGING THE SCAN FEATURE SETTINGS

Your machine provides you with the following setting options to allow you to customize your scan jobs.
The settings you change will be maintained for a certain time, but after that period, the options will be
reset to default values.
Scan Size: Sets the image size.
Original Type: Sets the original documents's type.
Resolution: Sets the image resolution.
Scan Color: Sets the color mode.
Scan Format: Sets the file format in which the image is to be saved. If you select TIFF or PDF, you
can select to scan multiple pages. Depending on the selected scan type, this option may not
appear.
To customize the settings before starting a scan job:
1. Press Scan/Email.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Scan Feature and press OK.
4. Press the up/down until the scan type you want highlights and press OK.
5. Press the up/down until the scan setting option you want highlights and press OK.
6. Press the up/down arrow until the desired status highlights and press OK.
7. Repeat steps 5 and 6 to set other setting options.
8. When you have finished, press Stop/Clear to return to ready mode.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com manuals search engine
119
Page 9 of 16
8/4/2009