Muratec MFX-3550 User Manual page 148

Machine status and advanced feature
Image
TCR
Dial Mode This setting may not be available depending on your country. If you cannot reach this
Receiving
OPTION
Receive
Mode
Ring to
Answer
Stamp RCV
Name
Rcv Start
Code
Auto
Reduction
Discard
Size
Junk Fax
Setup
DRPD
Mode
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
options are On, Off, and On-Error, which prints only when a transmission is not
successful.
This function allows users to know what fax messages have been sent by showing sent
messages in the transmission report.
The first page of the message is turned into an image file than is printed on the
transmission report so the users can see what messages have been sent.
However, you can not use this function when sending fax without saving the data in
the memory.
option, your machine does not support this feature.
You can set the dial mode for your machine to either tone dialling or pulse dialling. If
you have a public telephone system or a private branch exchnage(PBX) system, you
may need to select Pulse. Contact your local telephone company if you are not sure
which dial mode to use.
If you select Pulse, some phone system features might not be available. It can also
take longer to dial a fax or phone number.
You can select the default fax receiving mode. For details on receiving faxes in each
mode, see Changing the receive
You can specify the number of times the machine rings before answering an incoming
call.
This option allows the machine to automatically print the page number, and the date
and time of reception at the bottom of each page of a received fax.
This code allows you to initiate fax reception from an extension phone plugged into
the EXT socket on the back of the machine. If you pick up the extension phone and
hear fax tones, enter the code. It is preset to *9* at the factory.
When receiving a fax containing pages as long as or longer than the paper loaded in
the paper tray, the machine can reduce the size of the original to fit the size of the
paper loaded in the machine.
Turn on this feature if you want to automatically reduce an incoming page.
With this feature set to Off, the machine cannot reduce the original to fit onto one
page. The original will be divided and printed in actual size on two or more pages.
When receiving a fax containing pages as long as or longer than the paper in your
machine, you can set the machine to discard a specific length from the end of the
received fax. The machine will print the received fax on one or more sheets of paper,
minus the data that would have been on the specified discard segment.
When the received fax contains pages larger than the paper in your machine, and
Auto Reduction has been turned on, the machine will reduce the fax to fit on the
existing paper, and nothing will be discarded.
This setting may not be available depending on your country. Using this feature, the
system will not accept faxes sent from remote stations whose numbers are stored in
the memory as junk fax numbers. This feature is useful for blocking any unwanted
faxes.
When you turn on this feature, you can access the following options to set junk fax
numbers.
Add: Allows you to set up to 10 fax numbers.
Delete: Allows you to delete the desired junk fax number. If you select Delete
All, Allows you to delete all junk fax numbers.
This mode enables a user to use a single telephone line to answer several different
telephone numbers. In this menu, you can set the machine to recognize which ring
patterns to answer. For details about this feature, see
manuals search engine
DESCRIPTION
modes.
Receiving faxes using DRPD
147
Page 2 of 9
8/4/2009